How To Clean Motorcycle Brakes by KingsMotorcycleFairings.com

Riding a motorcycle can be exhilarating, but it’s important to ensure that your bike is always in top condition, especially when it comes to the brakes. Cleaning your motorcycle brakes is an essential part of maintaining your bike’s overall performance and safety. Our team at KingsMotorcycleFairings.com has constructed beneficial steps and tips you can follow to clean your motorcycle brakes.

Gather The Necessary Supplies: Before you start cleaning your motorcycle brakes, gather the necessary supplies, including brake cleaner, a clean cloth, a bucket of water, and a wire brush.

Remove The Brake Pads: To clean the brake pads, you need to remove them first. To remove motorcycle brake pads, you need to first remove the brake caliper bolts that hold the caliper in place. Then, gently pull the caliper away from the rotor and remove the brake pads from the caliper by sliding or pulling them out. Be careful not to damage the brake pads or the caliper during this process. Refer to your bike’s owner manual for specific instructions on how to remove your motorcycle's brake pads.

Clean The Brake Pads: Use a wire brush to gently scrub the brake pads to remove any dirt or debris. Be careful not to scratch or damage the surface of the brake pads.

Clean The Calipers: Use water and the brake cleaner to spray the calipers thoroughly. This will help remove any grease or dirt that may have accumulated on them. Use a clean cloth to wipe away any excess cleaner.

Clean The Rotors: Use brake cleaner to spray the rotors thoroughly. Be sure to remove any dirt, debris or brake dust that may have accumulated on the rotors. Use a clean cloth to wipe away any excess cleaner.

Reinstall The Brake Pads: Once the brake pads are clean, insert the pads into the caliper and make sure they're seated properly. Then, slide the caliper back onto the rotor and align it with the mounting holes. Reinsert the bolts and tighten them securely. It’s also best to refer to your bike’s owner manual for specific instructions on how to reinstall your motorcycle's brake pads.

Test The Brakes: After you’ve cleaned your motorcycle brakes and reinstalled the brake pads, take your bike for a test ride to ensure that the brakes are working correctly. Test the brakes by squeezing the brake lever or pedal, making sure the brakes feel firm and responsive. Be sure to test the brakes in a safe, open area.

In conclusion, cleaning your motorcycle brakes is a crucial part of maintaining your bike’s overall safety and performance. Regular cleaning will help ensure that your brakes work efficiently and effectively, and keep you safe on the road. By following these simple steps, you can clean your motorcycle brakes quickly and easily, and keep your bike in top condition for years to come.

The team here at KingsMotorcycleFairings.com wishes that you found this article helpful. If you have extra time, we’d love for you to visit our online store for the largest selection of quality Motorcycle Fairing Kits, Helmets, Boots, Goggles, Backpacks & Accessories!